NSN: 5905-00-007-7271

Technical Characteristics

• Actuator Travel Control Feature

  stops

• First Flat Length

  0.625 inches nominal

• Rotary Actuator Travel In Angular Deg

  312.0 nominal

• Body Style

  cylindrical bushing mounted

• Electrical Resistance Per Section

  10.0 kilohms single section

• Mounting Method

  standard bushing w/panel seal

• Mounting Bushing Length

  0.359 inches maximum

• Screw Thread Diameter

  0.375 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 single section

• Nonturn Device Radius

  0.546 inches maximum

• Body Diameter

  1.031 inches minimum and 1.157 inches maximum

• Resistance Temp Characteristic Range Per Section In Percent

  -2.5/+2.5 85 deg celsius single section and +0.0/+3.5 -25 deg celsius single section and +0.0/+2.0 0 deg celsius single section and +0.0/+7.0 -55 deg celsius single section and +0.0/+5.5 120 deg celsius single section

• Terminal Type And Quantity

  3 tab, solder lug

• Test Data Document

  05869-719110 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Body Length

  0.460 inches minimum and 0.750 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  312.0 nominal

• Maximum Starting Torque

  6.00 inch-ounces

• Maximum Running Torque

  1.00 inch-ounces

• Overall Length

  2.166 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Shaft Length

  1.375 inches nominal

• Screw Thread Series Designator

  unef

• Flat Height

  0.211 inches minimum and 0.221 inches maximum

• Shaft Style

  round, flatted

• Nonturn Device Location

  at 9 oclock

• Power Dissipation Rating Per Section In Watts

  2.25 free air single section

• Maximum Stop Torque

  192.00 inch-ounces

• Standard Taper Curve Per Section

  a single section

• Terminal Location

  radially positioned over less than half the circumference

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Shaft Diameter

  0.250 inches minimum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Overall Diameter

  1.515 inches maximum

• Section Quantity

  1

• Screw Thread Quantity Per Inch

  32.0