NSN: 5905-00-072-3093

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Terminal Type And Quantity

  3 turret

• Shaft End Play

  0.005 inches

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary at 10'30 oclock

• Function Conformity Per Section

  single section independent linearity

• Shaft Bearing Type

  bearing

• Body Length

  1.880 inches maximum

• Shaft Length

  0.406 inches minimum and 0.468 inches maximum

• Cubic Measure

  1.403 cubic inches

• Pilot Diameter Runout

  0.001 inches

• Electrical Resistance Per Section

  20.0 percent, rated amperes c and better flooring

• Body Diameter

  1.062 nominal inches

• Rotary Actuator Travel In Angular Deg

  320.0 nominal

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Shaft Diameter

  0.1242 inches minimum and 0.1247 inches maximum

• Flat Height

  0.104 inches minimum and 0.106 inches maximum

• Lateral Runout

  0.002 inches

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Maximum Starting Torque

  0.35 inch-ounces

• Shaft Style

  round, flatted

• Mounting Method

  clamp ring

• Maximum Running Torque

  0.35 inch-ounces

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Mounting Lip Depth

  0.0570 nominal mils and 0.0670 nominal centimeters

• Function Conformity Tolerance Per Section

  -0.25/+0.25 single section

• Pilot Diameter

  0.9683 inches minimum and 0.9688 inches maximum

• First Flat Length

  0.377 inches nominal

• Features Provided

  humidity proof

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  320.0 nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Undercut Width

  0.0570 inches minimum

• Function Characteristic Per Section

  7 oclock primary input

• Section Quantity

  1

• Terminal Location

  radially positioned over more than half the circumference

• Undercut Diameter

  0.9683 inches minimum and 0.9690 inches maximum

• Shaft Runout

  0.002 inches

• Test Data Document

  97942-577r900 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Lip Diameter

  1.0570 inches minimum and 1.0670 inches maximum