NSN: 5905-00-088-1516

Technical Characteristics

• Maximum Running Torque

  6.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 single section

• Body Length

  0.359 inches minimum and 0.391 inches maximum

• Terminal Type And Quantity

  3 tab, solder lug

• Power Dissipation Rating Per Section In Watts

  0.25 free air single section

• Nonturn Device Location

  at 3 oclock and at 9 oclock

• Screw Thread Diameter

  0.234 inches minimum and 0.266 inches maximum

• Mounting Bushing Length

  0.234 inches minimum and 0.266 inches maximum

• Resistance Tolerance Per Section In Percent

  -20.0/+20.0 single section

• Maximum Starting Torque

  6.00 inch-ounces

• Body Diameter

  0.719 inches minimum and 0.781 inches maximum

• Resistance Temp Characteristic Range Per Section In Percent

  -3.0/+0.0 -55 deg celsius single section and -5.0/+10.0 25 deg celsius single section and -5.0/+10.0 -25 deg celsius single section and +0.0/+3.0 120 deg celsius single section

• Effective Electrical Rotation In Deg Angular Rotation

  295.0 minimum and 305.0 maximum

• Actuator Type

  single shaft

• Flat Height

  0.100 inches minimum and 0.110 inches maximum

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Cubic Measure

  0.155 cubic inches

• Rotary Actuator Travel In Angular Deg

  295.0 minimum and 305.0 maximum

• Mounting Method

  standard bushing

• Features Provided

  humidity proof

• Nonturn Device Radius

  0.359 inches minimum and 0.391 inches maximum

• Maximum Stop Torque

  80.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Terminal Location

  rear end

• Shaft Diameter

  0.124 inches minimum and 0.126 inches maximum

• Body Style

  cylindrical bushing mounted

• Shaft Length

  0.850 inches minimum and 0.910 inches maximum

• Shaft Style

  round, slotted, flatted

• Test Data Document

  82577-3032911 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Electrical Resistance Per Section

  2.5 kilohms single section

• Section Quantity

  1

• Screw Thread Quantity Per Inch

  32.0

• Standard Taper Curve Per Section

  c single section

• First Flat Length

  0.540 inches minimum and 0.600 inches maximum