NSN: 5905-00-104-9406

Technical Characteristics

• Shaft Runout

  0.002 inches

• Power Dissipation Rating Per Section In Watts

  1.5 free air all sections

• Test Data Document

  70210-805360 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Undercut Width

  0.0570 inches minimum

• Shaft Length

  0.550 inches minimum and 0.570 inches maximum

• Rotary Actuator Travel In Angular Deg

  349.368 nominal

• Body Diameter

  1.445 inches maximum

• Maximum Stop Torque

  20.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Terminal Type And Quantity

  8 turret

• Terminal Location

  radially positioned over less than half the circumference

• Overall Length

  2.450 inches maximum

• Switch Contact Arrangement

  single pole, single throw, normally open, both positions maintained

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Mounting Method

  clamp ring

• Overall Diameter

  1.880 inches maximum

• Function Conformity Tolerance Per Section

  -0.0003/+0.0003 1st section

• Reliability Indicator

  not established

• Actuator Type

  single shaft

• Lateral Runout

  0.002 inches

• Switch Voltage Rating In Volts

  30.0

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Resistance Tolerance Per Section In Percent

  -2.0/+2.0 all sections

• Electrical Resistance Per Section

  2.5 percent, rated amperes c and better finish

• Body Style

  cylindrical servo mounted

• Maximum Starting Torque

  2.60 inch-ounces

• Function Conformity Per Section

  all sections absolute conformity

• Shaft Style

  round

• Pilot Diameter Runout

  0.001 inches

• Unpackaged Unit Weight

  182.0 grams

• Mechanical Backlash In Deg Angular Rotation

  0.1

• Switch Operating Position

  any position of rotation travel

• Undercut Diameter

  1.310 inches maximum

• Body Length

  1.880 inches maximum

• Maximum Running Torque

  2.60 inch-ounces

• Shaft Diameter

  0.1869 inches minimum and 0.1872 inches maximum

• Pilot Diameter

  0.9995 inches minimum and 1.0000 inches maximum

• Electrical Resistance Per Section

  2.9 percent, rated amperes c and better industrial clears

• Switch Type

  rotary

• Mounting Lip Diameter

  1.4320 inches minimum and 1.4420 inches maximum

• Function Characteristic Per Section

  all sections linear

• Features Provided

  switch

• Shaft Bearing Type

  ball

• Switch Current Type And Rating In Amps

  0.003 dc

• Section Quantity

  2

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -400.0/+400.0 all sections

• Shaft End Play

  0.005 inches

• Function Conformity Tolerance Per Section

  -0.0007/+0.0007 2nd section

• Effective Electrical Rotation In Deg Angular Rotation

  343.368 nominal

• Actuator Travel Control Feature

  stops