NSN: 5905-00-104-9413

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Test Data Document

  70210-805361 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Body Length

  2.885 inches maximum

• Shaft End Play

  0.005 inches

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections

• Switch Current Type And Rating In Amps

  0.005 dc

• Shaft Style

  round, slotted

• Mechanical Backlash In Deg Angular Rotation

  0.1

• Fixed Tap Quantity Per Section

  1 3rd section

• Pilot Diameter

  1.2495 inches minimum and 1.2500 inches maximum

• Unpackaged Unit Weight

  6.50 ounces

• Shaft Diameter

  0.1869 inches minimum and 0.1872 inches maximum

• Precious Material And Location

  terminal surfaces gold

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 3rd section

• Precious Material

  gold

• Undercut Diameter

  1.880 inches maximum

• Terminal Type And Quantity

  15 turret

• Switch Type

  rotary

• Effective Electrical Rotation In Deg Angular Rotation

  349.8 nominal

• Section Quantity

  4

• Function Characteristic Per Section

  8 oclock 12th primary

• Features Provided

  switch

• Shaft Bearing Type

  ball

• Switch Operating Position

  start of rotation

• Function Conformity Tolerance Per Section

  -0.25/+0.25 2nd section

• Reliability Indicator

  not established

• Actuator Type

  single shaft

• Tap Location Tolerance Per Section

  -5.0/+5.0 deg angular rotation 3rd section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Shaft Radial Play

  0.002 inches

• Function Conformity Tolerance Per Section

  -0.25/+0.25 1st section

• Function Characteristic Per Section

  10 oclock primary input

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  75.4 3rd section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  65.0 all sections

• Function Characteristic Per Section

  9 oclock 12th primary

• Switch Voltage Rating In Volts

  28.0

• Electrical Resistance Per Section

  20.0 percent, rated amperes c and better industrial clears

• Body Style

  cylindrical servo mounted

• Maximum Starting Torque

  2.60 inch-ounces

• Body Diameter

  2.030 inches maximum

• Function Conformity Per Section

  all sections absolute conformity

• Resistance Tolerance Per Section In Percent

  -2.0/+2.0 2nd section

• Pilot Diameter Runout

  0.001 inches

• Resistance Tolerance Per Section In Percent

  -2.0/+2.0 1st section

• Power Dissipation Rating Per Section In Watts

  4.0 free air all sections

• Shaft Runout

  0.002 inches

• Undercut Width

  0.0570 inches minimum

• Function Conformity Tolerance Per Section

  -0.01/+0.01 3rd section

• Function Characteristic Per Section

  11 oclock primary input

• Function Conformity Tolerance Per Section

  -0.00035/+0.00035 4th section

• Electrical Resistance Per Section

  2.0 percent, rated amperes c and better finish

• Resistance Tolerance Per Section In Percent

  -2.5/+2.5 4th section

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Mounting Lip Diameter

  1.9950 inches minimum and 2.0050 inches maximum

• Overall Length

  3.625 inches nominal

• Terminal Location

  radially positioned over less than half the circumference

• Switch Contact Arrangement

  single pole, single throw, normally open, both positions maintained

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Mounting Method

  clamp ring

• Lateral Runout

  0.004 inches

• Shaft Length

  0.630 inches minimum and 0.650 inches maximum