NSN: 5905-00-418-2452

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Shaft End Play

  0.005 inches

• Shaft Length

  0.595 inches minimum and 0.655 inches maximum

• Function Characteristic Per Section

  8 oclock 11th primary

• Section Quantity

  2

• Terminal Type And Quantity

  11 turret

• Test Data Document

  07217-629892 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections

• Shaft Style

  round, slotted

• Electrical Resistance Per Section

  50.0 percent, rated amperes c and better finish

• Shaft Diameter

  0.1245 inches minimum and 0.1247 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  3528.0 nominal

• Undercut Diameter

  0.781 inches maximum

• Body Diameter

  0.870 inches minimum and 0.880 inches maximum

• Overall Length

  2.430 inches maximum

• Body Style

  cylindrical servo mounted

• Overall Diameter

  1.065 inches maximum

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 1st section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Shaft Radial Play

  0.002 inches

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary pattern

• Actuator Type

  single shaft

• Function Characteristic Per Section

  9 oclock all primaries

• Reliability Indicator

  not established

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 2nd section

• Lateral Runout

  0.003 inches

• Pilot Diameter

  0.7495 inches minimum and 0.7500 inches maximum

• Mounting Method

  clamp ring

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Function Conformity Per Section

  2nd section independent linearity

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Lip Diameter

  0.8700 inches minimum and 0.8800 inches maximum

• Shaft Runout

  0.001 inches

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Function Conformity Tolerance Per Section

  -0.075/+0.075 2nd section

• Maximum Starting Torque

  1.50 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Body Length

  1.775 inches maximum

• Power Dissipation Rating Per Section In Watts

  0.5 7th secondary finish

• Fixed Tap Quantity Per Section

  5 2nd section

• Electrical Resistance Per Section

  100.0 percent, rated amperes c and better industrial clears

• Undercut Width

  0.0570 inches minimum