NSN: 5905-00-437-8072
Resistors
RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION
RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Actuator Travel Control Feature
stops
-
Effective Electrical Rotation In Deg Angular Rotation
0.309 minimum and 0.315 maximum
-
Power Dissipation Rating Per Section In Watts
2.0 free air all sections
-
Shaft Length
0.860 inches minimum and 0.900 inches maximum
-
Section Quantity
2
-
Standard Taper Curve Per Section
a all sections
-
Terminal Length
0.315 inches maximum
-
Terminal Location
radially positioned over less than half the circumference
-
Test Data Document
10001-1202438 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
-
Body Diameter
1.170 inches nominal
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 all sections
-
Screw Thread Quantity Per Inch
32.0
-
Body Length
1.280 inches maximum
-
Mounting Method
locking bushing
-
Nonturn Device Location
at 9 oclock
-
Mounting Bushing Length
0.360 inches minimum and 0.400 inches maximum
-
Screw Thread Series Designator
unef
-
Resistance Tolerance Per Section In Percent
-10.0/+10.0 2nd section
-
Actuator Type
single shaft
-
Mechanical Backlash In Deg Angular Rotation
2.5
-
Nonturn Device Radius
0.510 inches minimum and 0.550 inches maximum
-
Electrical Resistance Per Section
100.000 ohms c and better industrial clears
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-300.0/+300.0 all sections
-
Electrical Resistance Per Section
100.000 ohms c and better finish
-
Overall Length
2.180 inches maximum
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
120.0 all sections
-
Screw Thread Diameter
0.375 inches nominal
-
Rotary Actuator Travel In Angular Deg
309.0 minimum and 315.0 maximum
-
Maximum Starting Torque
9.00 inch-ounces
-
Resistance Tolerance Per Section In Percent
-10.0/+10.0 1st section
-
Shaft Style
round, slotted
-
Body Style
cylindrical bushing mounted
-
Terminal Type And Quantity
6 eyelet
-
Overall Diameter
1.485 inches maximum
-
Shaft Diameter
0.248 inches minimum and 0.250 inches maximum