NSN: 5905-00-496-6067

Technical Characteristics

• Terminal Type And Quantity

  4 tab,solder lug

• Function Characteristic Per Section

  single section linear

• Actuator Travel Control Feature

  continuous motion

• Resistance Tolerance Per Section In Percent

  m10.0/p10.0 single section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Terminal Location

  radially positioned over more than half the circumference

• Shaft Radial Play

  0.001 inches

• Maximum Running Torque

  0.10 inch-ounces (ounce-inches)

• Effective Electrical Rotation In Deg Angular Rotation

  340.0 nominal

• Shaft Bearing Type

  ball

• Mounting Lip Depth

  0.0620 inches nominal

• Mounting Lip Diameter

  0.7500 inches nominal

• Body Length

  0.750 inches maximum

• Shaft Length

  0.500 inches nominal

• Shaft Diameter

  0.1245 inches minimum and 0.125 inches maximum

• Body Diameter

  0.750 inches nominal

• Overall Length

  1.250 inches nominal

• Pilot Length

  0.0620 inches nominal

• Pilot Diameter

  0.6245 inches minimum and 0.6250 inches maximum

• Section Quantity

  1

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Tap Location From Ccw Terminal Per Section In Ohms

  5000.0 single section

• Tap Location Tolerance Per Section

  m0.1/p0.1 ohms single section

• Fixed Tap Quantity Per Section

  1 single section

• Function Conformity Per Section

  single section independent linearity

• Power Dissipation Rating Per Section In Watts

  1.25 free air single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  m200.0/p200.0 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Function Conformity Tolerance Per Section

  m0.50/p0.50 single section

• Electrical Resistance Per Section

  10.0 kilohms single section

• Mounting Method

  clamp ring

• Pilot Diameter Runout

  0.001 inches

• Lateral Runout

  0.001 inches

• Shaft Runout

  0.001 inches

• Shaft End Play

  0.003 inches

• Maximum Starting Torque

  0.35 inch-ounces (ounce-inches)

• Actuator Type

  single shaft

• Overall Diameter

  0.925 inches nominal

• Undercut Width

  0.0570 inches minimum

• Undercut Diameter

  0.625 inches maximum

• Reliability Indicator

  not established