NSN: 5905-00-502-6860

Technical Characteristics

• Tap Location From Ccw Terminal Per Section In Ohms

  50000.0 single section

• Power Dissipation Rating Per Section In Watts

  1.5 free air single section

• Shaft Style

  round, slotted

• Shaft End Play

  0.00500 inches

• Shaft Bearing Type

  ball

• Actuator Type

  double ended shaft

• Body Diameter

  1.062 inches maximum

• Tap Location Tolerance Per Section

  -1.5/+1.5 deg angular rotation single section

• Effective Electrical Rotation In Deg Angular Rotation

  340.0 nominal

• Electrical Resistance Per Section

  100.000 kilohms single section

• Function Conformity Per Section

  single section independent linearity

• Undercut Width

  0.0630 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Mechanical Backlash In Deg Angular Rotation

  0.25

• Body Length

  0.785 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Pilot Diameter Runout

  0.00100 inches

• Fixed Tap Quantity Per Section

  1 single section

• Maximum Starting Torque

  1.00 inch-ounces

• Maximum Running Torque

  1.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Shaft Length

  0.771 inches minimum and 0.779 inches maximum

• Shaft Diameter

  0.125 inches nominal

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Lateral Runout

  0.002 inches

• Reliability Indicator

  not established

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Actuator Travel Control Feature

  continuous motion

• Overall Length

  2.041 inches minimum and 2.081 inches maximum

• Terminal Type And Quantity

  4 tab, solder lug

• Mounting Method

  clamp ring

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -40.0/+40.0 single section

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Runout

  0.001 inches

• Pilot Diameter

  0.9683 inches minimum and 0.9688 inches maximum

• Undercut Diameter

  0.963 inches minimum and 0.973 inches maximum

• Function Characteristic Per Section

  single section linear

• Pilot Length

  0.0570 inches nominal

• Section Quantity

  1

• Mounting Lip Diameter

  1.0570 inches minimum and 1.0670 inches maximum