NSN: 5905-00-546-1354
Resistors
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Fixed Tap Quantity Per Section
1 all sections
-
Pilot Length
0.0670 inches maximum
-
Angle Of Mounting Hole In Deg
20.0
-
Body Style
cylindrical servo mounted
-
Resistance Tolerance Per Section In Percent
-2.0/+2.0 5th section
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 1st section
-
Electrical Resistance Per Section
50.000 percent, rated amperes c and better industrial clears
-
Body Length
4.026 inches minimum and 4.106 inches maximum
-
Pilot Diameter Runout
0.00150 inches
-
Shaft Radial Play
0.002 inches
-
Rotary Actuator Travel In Angular Deg
360.0 nominal
-
Undercut Width
0.0620 inches minimum
-
Lateral Runout
0.002 inches
-
Electrical Resistance Per Section
50.000 percent, rated amperes c and better select
-
Effective Electrical Rotation In Deg Angular Rotation
357.0 nominal
-
Pilot Diameter
1.8740 inches minimum
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-40.0/+40.0 3rd section
-
Reliability Indicator
not established
-
Screw Thread Series Designator
unc
-
Electrical Resistance Per Section
50.000 percent, rated amperes c and better v.g. stepping
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-40.0/+40.0 5th section
-
Body Diameter
1.984 inches minimum and 2.016 inches maximum
-
Actuator Travel Control Feature
continuous motion
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-40.0/+40.0 6th section
-
Electrical Resistance Per Section
50.000 percent, rated amperes c finish
-
Maximum Starting Torque
7.00 inch-ounces
-
Mounting Method
threaded hole
-
Terminal Type And Quantity
18 tab, solder lug
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 all sections
-
Screw Thread Diameter
0.164 inches nominal
-
Undercut Diameter
1.874 inches minimum and 1.875 inches maximum
-
Angle Between Centerlines Of Mounting Holes In Deg
120.0
-
Tap Location From Ccw Terminal Per Section In Ohms
3450.0 all sections
-
Terminal Location
radially positioned over more than half the circumference
-
Shaft Runout
0.002 inches
-
Screw Thread Quantity Per Inch
32.0
-
Shaft Diameter
0.250 inches nominal
-
Mounting Facility Quantity
3
-
Shaft Style
round
-
Shaft Length
0.605 inches minimum and 0.656 inches maximum
-
Resistance Tolerance Per Section In Percent
-1.0/+1.0 6th section
-
Electrical Resistance Per Section
2.000 percent, rated amperes c drop siding
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
120.0 all sections
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 4th section
-
Resistance Tolerance Per Section In Percent
-1.0/+1.0 3rd section
-
Mounting Hole/Stud Circle Diameter
1.245 inches minimum and 1.255 inches maximum
-
Mounting Lip Depth
0.0620 inches nominal
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-160.0/+160.0 4th section
-
Actuator Type
dual concentric
-
Section Quantity
6
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-160.0/+160.0 2nd section
-
Electrical Resistance Per Section
50.000 percent, rated amperes c and better finish
-
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-160.0/+160.0 1st section
-
Shaft Bearing Type
ball
-
Shaft End Play
0.00500 inches
-
Maximum Running Torque
3.00 inch-ounces
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 2nd section
-
Mounting Lip Diameter
1.9840 inches minimum
-
Power Dissipation Rating Per Section In Watts
2.0 free air all sections