NSN: 5905-00-723-3599

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Maximum Stop Torque

  128.00 inch-ounces

• Power Dissipation Rating Per Section In Watts

  1.5 free air single section

• Terminal Location

  longitudinally positioned on the circumference

• Shaft Bearing Type

  ball

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Tap Location Tolerance Per Section

  -10.0/+10.0 deg angular rotation 3rd section

• Shaft Diameter

  0.125 inches nominal

• Terminal Type And Quantity

  3 solder stud

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Pilot Length

  0.06200 inches nominal

• Body Length

  1.562 inches minimum and 1.580 inches maximum

• Mounting Method

  clamp ring

• Tap Location Tolerance Per Section

  -10.0/+20.0 deg angular rotation 2nd section

• Function Characteristic Per Section

  single section linear

• Overall Length

  2.156 inches minimum and 2.236 inches maximum

• Body Diameter

  0.875 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 minimum

• Maximum Starting Torque

  0.60 inch-ounces

• Rotary Actuator Travel In Angular Deg

  3600.0 minimum

• Undercut Diameter

  0.750 inches nominal

• Maximum Running Torque

  0.50 inch-ounces

• Tap Location Tolerance Per Section

  -2.0/+2.0 deg angular rotation 1st section

• Section Quantity

  1

• Electrical Resistance Per Section

  15.000 kilohms single section

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Diameter

  0.87500 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Shaft Length

  0.594 inches minimum and 0.656 inches maximum

• Undercut Width

  0.05700 inches minimum

• Pilot Diameter

  0.62400 inches minimum and 0.62500 inches maximum

• Fixed Tap Quantity Per Section

  3 single section

• Shaft Style

  round

• Mounting Lip Depth

  0.06200 inches nominal

• Mounting Facility Quantity

  3

• Test Data Document

  24930-123081 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Function Conformity Tolerance Per Section

  -0.05/+0.05 single section

• Mechanical Backlash In Deg Angular Rotation

  1.0

• Body Style

  cylindrical servo mounted

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section