NSN: 5905-00-822-5764

Technical Characteristics

• Section Quantity

  1

• Reliability Indicator

  not established

• First Flat Length

  0.625 inches nominal

• Undercut Diameter

  1.8745 inches minimum and 1.8755 inches maximum

• Undercut Width

  0.0520 inches minimum and 0.0720 inches maximum

• Mounting Lip Diameter

  1.9900 inches minimum and 2.0100 inches maximum

• Mounting Lip Depth

  0.0520 inches minimum and 0.0720 inches maximum

• Switch Voltage Rating In Volts

  125.0

• Actuator Type

  double ended shaft

• Effective Electrical Rotation In Deg Angular Rotation

  340.0 nominal

• Maximum Running Torque

  0.32 inch-ounces (ounce-inches)

• Shaft End Play

  0.005 inches

• Switch Contact Arrangement

  single pole, single throw, normally open, both positions maintained

• Features Provided

  switch

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Function Conformity Per Section

  single section independent linearity

• Fixed Tap Quantity Per Section

  1 single section

• Tap Location Tolerance Per Section

  -1.0 to 1.0 ohms single section

• Function Characteristic Per Section

  single section linear

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0 to 20.0 single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  25.0 single section

• Body Style

  5b cylindrical servo mounted

• Pilot Diameter

  1.8745 inches minimum and 1.8755 inches maximum

• Pilot Length

  0.0550 inches minimum and 0.0600 inches maximum

• Overall Length

  2.458 inches minimum and 2.542 inches maximum

• Body Diameter

  1.990 inches minimum and 2.010 inches maximum

• Shaft Diameter

  0.249 inches nominal

• Shaft Length

  0.750 inches nominal

• Body Length

  0.990 inches minimum and 1.010 inches maximum

• Shaft Style

  20c round, v flatted

• Shaft Bearing Type

  ball

• Switch Type

  push-pull

• Maximum Starting Torque

  0.60 inch-ounces (ounce-inches)

• Shaft Runout

  0.001 inches

• Lateral Runout

  0.002 inches

• Pilot Diameter Runout

  0.001 inches

• Shaft Radial Play

  0.001 inches

• Switch Operating Position

  any position of rotation travel

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Method

  clamp ring

• Electrical Resistance Per Section

  50.0 kilohms single section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Function Conformity Tolerance Per Section

  -0.15 to 0.15 single section

• Power Dissipation Rating Per Section In Watts

  5.0 free air single section

• Resistance Tolerance Per Section In Percent

  -1.0 to 1.0 single section

• Actuator Travel Control Feature

  continuous motion

• Tap Location From Ccw Terminal Per Section In Ohms

  25000.0 single section

• Switch Current Type And Rating In Amps

  3.000 ac

• Terminal Type And Quantity

  4 solder stud