NSN: 5905-00-864-6560

Technical Characteristics

• Terminal Type And Quantity

  6 turret

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Reliability Indicator

  not established

• Maximum Starting Torque

  1.20 inch-ounces

• Lateral Runout

  0.003 inches

• Angle Of Mounting Hole In Deg

  90.0

• Overall Diameter

  1.062 inches nominal

• Mounting Method

  clamp ring

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Undercut Width

  0.0580 inches minimum and 0.0680 inches maximum

• Shaft Length

  0.344 inches minimum and 0.406 inches maximum

• Mounting Lip Diameter

  0.8700 inches minimum and 0.8800 inches maximum

• Function Conformity Tolerance Per Section

  -0.15/+0.15 all sections

• Shaft Runout

  0.001 inches

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better industrial clears

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  25.0 all sections

• Special Features

  lubrication orifice flush with rear of pot

• Mounting Hole/Stud Circle Diameter

  0.750 inches nominal

• Shaft End Play

  0.004 inches

• Electrical Resistance Per Section

  1.0 percent, rated amperes c and better finish

• Body Diameter

  0.859 inches minimum and 0.891 inches maximum

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Undercut Diameter

  0.624 inches minimum and 0.625 inches maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Maximum Stop Torque

  128.00 inch-ounces

• Terminal Location

  longitudinally positioned on the circumference

• Section Quantity

  2

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Function Characteristic Per Section

  all sections linear

• Pilot Diameter

  0.6240 inches minimum and 0.6250 inches maximum

• Body Length

  2.995 inches maximum

• Features Provided

  nonmetallic shaft

• Overall Length

  3.370 inches nominal

• Test Data Document

  05257-x900182 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Shaft Diameter

  0.1245 inches minimum and 0.1248 inches maximum

• Function Conformity Per Section

  all sections absolute conformity

• Body Style

  cylindrical servo mounted

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 all sections

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Maximum Running Torque

  1.00 inch-ounces

• Pilot Diameter Runout

  0.0015 inches

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Actuator Travel Control Feature

  clutch

• Shaft Radial Play

  0.002 inches

• Actuator Type

  single shaft