NSN: 5905-00-887-9469

Technical Characteristics

• Test Data Document

  06481-900217-113 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Lip Depth

  0.0620 inches nominal

• Mounting Hole/Stud Circle Diameter

  1.250 inches nominal

• Undercut Diameter

  1.812 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Shaft Style

  round

• Mounting Lip Diameter

  2.0050 inches maximum

• Maximum Starting Torque

  3.50 inch-ounces

• Function Conformity Per Section

  all sections absolute conformity

• Fixed Tap Quantity Per Section

  1 all sections

• Mechanical Backlash In Deg Angular Rotation

  0.5

• Body Style

  cylindrical servo mounted

• Terminal Type And Quantity

  8 tab, solder lug

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  1800.0 all sections

• Pilot Diameter Runout

  0.0015 inches

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Body Diameter

  1.812 inches maximum

• Pilot Length

  0.0620 inches nominal

• Tap Location Tolerance Per Section

  -1.0/+1.0 deg angular rotation all sections

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Reliability Indicator

  not established

• Angle Of Mounting Hole In Deg

  90.0

• Shaft End Play

  0.0025 inches

• Mounting Method

  clamp ring

• Function Conformity Tolerance Per Section

  -0.066/+0.066 1st section

• Lateral Runout

  0.005 inches

• Rotary Actuator Travel In Angular Deg

  3780.0 nominal

• Shaft Runout

  0.001 inches

• Shaft Radial Play

  0.004 inches

• Electrical Resistance Per Section

  20.0 kilohms all sections

• Pilot Diameter

  1.1875 inches maximum

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Function Conformity Tolerance Per Section

  -0.033/+0.033 2nd section

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Shaft Length

  0.462 inches nominal

• Body Length

  4.000 inches maximum

• Shaft Bearing Type

  ball

• Function Characteristic Per Section

  all sections graph

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections

• Power Dissipation Rating Per Section In Watts

  5.0 free air all sections

• Section Quantity

  2

• Terminal Location

  longitudinally positioned on the circumference

• Maximum Running Torque

  3.00 inch-ounces

• Actuator Travel Control Feature

  stops