NSN: 5905-00-908-5330

Technical Characteristics

• Terminal Type And Quantity

  8 turret

• Effective Electrical Rotation In Deg Angular Rotation

  320.0 nominal

• Body Diameter

  0.875 inches nominal

• Shaft Diameter

  0.1248 inches maximum

• Shaft Length

  0.312 inches nominal

• Undercut Diameter

  0.750 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Undercut Diameter

  0.052 inches maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Shaft End Play

  0.005 inches

• Section Quantity

  2

• Function Characteristic Per Section

  all sections graph

• Undercut Length

  0.250 inches nominal

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections

• Mounting Lip Diameter

  0.8750 inches nominal

• Shaft Bearing Type

  bearing

• Pilot Diameter

  0.7500 inches maximum

• Actuator Type

  dual concentric

• Mounting Lip Depth

  0.0620 inches nominal

• Electrical Resistance Per Section

  2.0 kilohms all sections

• Function Conformity Tolerance Per Section

  -2.50/+2.50 all sections

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round, stepped

• Fixed Tap Quantity Per Section

  1 all sections

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Body Length

  1.350 inches maximum

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  160.0 all sections

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Function Conformity Per Section

  all sections absolute linearity

• Shaft Radial Play

  0.002 inches

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Pilot Length

  0.0620 inches nominal

• Undercut Width

  0.0620 inches nominal

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Test Data Document

  78286-s6148-10422 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Runout

  0.001 inches