NSN: 5905-01-048-9162

Technical Characteristics

• Undercut Diameter

  1.812 inches nominal

• Maximum Starting Torque

  1.20 inch-ounces (ounce-inches)

• Maximum Running Torque

  0.80 inch-ounces (ounce-inches)

• Shaft Radial Play

  0.002 inches

• Terminal Location

  upper adjacent side single row

• Mounting Method

  clamp ring

• Electrical Resistance Per Section

  1.000 kilohms single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Function Conformity Per Section

  single section independent linearity

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Terminal Type And Quantity

  3 tab,solder lug

• Actuator Type

  single shaft

• Shaft Bearing Type

  ball

• Mounting Hole/Stud Circle Diameter

  1.250 inches nominal

• Mounting Lip Diameter

  1.87500 inches nominal

• Body Length

  2.052 inches minimum and 2.072 inches maximum

• Shaft Length

  0.594 inches minimum and 0.656 inches maximum

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Body Diameter

  2.000 inches nominal

• Pilot Length

  0.06200 inches nominal

• Section Quantity

  1

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  m20.0/p20.0 single section

• Resistance Tolerance Per Section In Percent

  m3.0/p3.0 single section

• Power Dissipation Rating Per Section In Watts

  5.0 free air single section

• Pilot Diameter Runout

  0.00200 inches

• Lateral Runout

  0.003 inches

• Shaft Runout

  0.002 inches

• Shaft End Play

  0.00500 inches

• Mounting Lip Depth

  0.09300 inches nominal

• Undercut Width

  0.07300 inches minimum