NSN: 5905-01-093-0705

Technical Characteristics

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  771.43 single section and 642.86 single section and 514.29 single section and 257.14 single section and 900.0 single section and 3342.86 single section and 3214.29 single section and 2957.14 single section and 2828.57 single section and 2571.43 single

• Precious Material And Weight

  1.200 gold grains, troy

• Lateral Runout

  0.003 inches

• Terminal Type And Quantity

  30 turret

• Maximum Running Torque

  0.30 inch-ounces

• Mounting Method

  clamp ring

• Maximum Starting Torque

  0.40 inch-ounces

• Power Dissipation Rating Per Section In Watts

  2.5 7th secondary quality

• Terminal Location

  radially positioned over less than half the circumference

• Shaft End Play

  0.003 inches

• Function Characteristic Per Section

  7 oclock 11th primary

• Shaft Runout

  0.001 inches

• Features Provided

  humidity proof

• Shaft Diameter

  0.1248 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 minimum

• Body Diameter

  0.875 nominal centimeters

• Rotary Actuator Travel In Angular Deg

  3600.0 minimum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1

• Shaft Length

  0.750 inches nominal

• ~1

  section and 2314.29 single section and 2057.14 s

• Shaft Bearing Type

  ball

• Tap Location Tolerance Per Section

  -2.0/+2.0 deg angular rotation single section

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Maximum Stop Torque

  96.00 inch-ounces

• Fixed Tap Quantity Per Section

  27 single section

• Overall Length

  2.361 inches maximum

• Test Data Document

  56910-10004-101 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Lip Diameter

  0.8750 inches maximum

• Precious Material

  gold

• Precious Material And Location

  terminal surfaces gold

• Pilot Diameter

  0.6250 inches maximum

• Undercut Diameter

  0.781 inches maximum

• Mounting Lip Depth

  0.0620 nominal inches

• Special Features

  shaft has gear,14 teeth,127 pitch,20 deg p.a.,0.1102 in. max dia,full tooth 0.187 to 0.218

• Cubic Measure

  0.950 cubic inches

• Shaft Style

  round

• Electrical Resistance Per Section

  20.0 percent, rated amperes c and better flooring

• Overall Diameter

  1.062 inches maximum

• Body Style

  cylindrical servo mounted

• Function Conformity Per Section

  single section terminal base linearity

• Pilot Diameter Runout

  0.0015 inches

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Shaft Radial Play

  0.002 inches

• Pilot Length

  0.0620 inches nominal

• Undercut Width

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Function Conformity Tolerance Per Section

  -0.00071/+0.00071 single section

• Body Length

  1.580 inches maximum