NSN: 5905-01-120-8811

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Undercut Length

  0.550 nominal inches

• Section Quantity

  2

• Undercut Diameter

  0.125 nominal inches

• Body Style

  cylindrical bushing mounted

• Body Length

  0.584 inches nominal

• Rotary Actuator Travel In Angular Deg

  275.0 minimum and 285.0 maximum

• Terminal Type And Quantity

  6 tab, solder lug

• Maximum Running Torque

  6.00 inch-ounces

• Screw Thread Diameter

  0.375 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 all sections

• Electrical Resistance Per Section

  2.5 percent, rated amperes c and better

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Shaft Style

  round, stepped

• Shaft Diameter

  0.250 inches nominal

• Body Diameter

  0.750 nominal inches

• Maximum Starting Torque

  6.00 inch-ounces

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Shaft Length

  1.100 inches nominal

• Nonturn Device Radius

  0.375 inches nominal

• Screw Thread Series Designator

  unef

• Mounting Bushing Length

  0.250 inches nominal

• Nonturn Device Location

  at 9 oclock

• Mounting Method

  standard bushing

• Terminal Location

  radially positioned over less than half the circumference

• Power Dissipation Rating Per Section In Watts

  0.5 7th secondary at 10'30 oclock

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -100.0/+300.0 all sections

• Maximum Stop Torque

  80.00 inch-ounces

• Cubic Measure

  0.580 cubic inches

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Standard Taper Curve Per Section

  c all sections

• Screw Thread Quantity Per Inch

  32.0

• Effective Electrical Rotation In Deg Angular Rotation

  275.0 minimum and 285.0 maximum

• Test Data Document

  03640-6086854 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)