NSN: 5905-01-150-8544

Technical Characteristics

• Shaft Length

  0.330 inches nominal

• Body Diameter

  0.937 inches nominal

• Mounting Hole/Stud Circle Diameter

  0.562 inches nominal

• Shaft Radial Play

  0.001 inches

• Pilot Diameter Runout

  0.00100 inches

• Electrical Resistance Per Section

  1.830 percent, rated amperes c and better industrial clears

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Function Conformity Per Section

  all sections absolute linearity

• Shaft Diameter

  0.1242 inches minimum and 0.1247 inches maximum

• Lateral Runout

  0.002 inches

• Actuator Type

  single shaft

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Terminal Type And Quantity

  7 wire lead

• Section Quantity

  2

• Shaft End Play

  0.00500 inches

• Shaft Bearing Type

  ball

• Fixed Tap Quantity Per Section

  1 1st section

• Function Characteristic Per Section

  all sections table

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary finish

• Special Features

  gear train assembly part n0. 485288-001 assembled on back end of variable resistor

• Body Length

  1.297 inches nominal

• Screw Thread Quantity Per Inch

  64.0

• Body Style

  cylindrical hole/slot mounted

• Shaft Style

  round

• Effective Electrical Rotation In Deg Angular Rotation

  324.0 nominal

• Test Data Document

  89305-485289-002 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unc

• Tap Location Tolerance Per Section

  -10.0/+10.0 ohms 1st section

• Electrical Resistance Per Section

  5.580 percent, rated amperes c and better finish

• Mounting Facility Quantity

  2

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 all sections

• Tap Location From Ccw Terminal Per Section In Ohms

  150.0 1st section

• Terminal Location

  radially positioned over less than half the circumference

• Maximum Starting Torque

  0.50 inch-ounces

• Power Dissipation Rating Per Section In Watts

  0.7 7th secondary pattern

• Mounting Method

  threaded hole

• Function Conformity Tolerance Per Section

  -0.15/+0.15 all sections

• Shaft Runout

  0.001 inches

• Screw Thread Diameter

  0.073 inches nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Rotary Actuator Travel In Angular Deg

  324.0 nominal