NSN: 5905-01-256-0145

Technical Characteristics

• Resistance Temp Characteristic Range Per Section In Percent

  +0.0/+2.5 -25 deg celsius all sections and +0.0/+1.5 0 deg celsius all sections and -1.5/+1.5 85 deg celsius all sections and +0.0/+4.5 -55 deg celsius all sections and +0.0/+3.5 120 deg celsius all sections

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Shaft Diameter

  0.248 inches minimum and 0.250 inches maximum

• Resistance Tolerance Per Section In Percent

  -15.0/+15.0 all sections

• Flat Height

  0.216 inches nominal

• Rotary Actuator Travel In Angular Deg

  312.0 nominal

• Body Style

  cylindrical bushing mounted

• Section Quantity

  3

• Effective Electrical Rotation In Deg Angular Rotation

  292.0 nominal

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary finish

• Shaft Bearing Type

  sleeve

• Screw Thread Diameter

  0.375 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 all sections

• Body Diameter

  1.156 inches maximum

• Terminal Type And Quantity

  9 tab, solder lug

• Electrical Resistance Per Section

  150.0 ohms all sections

• First Flat Length

  0.437 inches nominal

• Features Provided

  panel seal and shaft seal

• End Item Identification

  oj-471v2/3

• Test Data Document

  05869-713186 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Nonturn Device Radius

  0.526 inches minimum and 0.536 inches maximum

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary pattern

• Actuator Type

  single shaft

• Mechanical Backlash In Deg Angular Rotation

  3.0

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Shaft Style

  round, flatted

• Body Length

  2.000 inches maximum

• Nonturn Device Location

  at 9 oclock

• Mounting Method

  standard bushing

• Standard Taper Curve Per Section

  a all sections

• Maximum Stop Torque

  192.00 inch-ounces

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Length

  0.875 inches nominal

• Power Dissipation Rating Per Section In Watts

  1.27 7th secondary grams

• Maximum Running Torque

  18.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Mounting Bushing Length

  0.406 inches nominal

• Screw Thread Quantity Per Inch

  32.0

• Maximum Starting Torque

  18.00 inch-ounces