NSN: 5905-01-347-1997

Technical Characteristics

• Pilot Diameter

  0.7495 inches minimum and 0.7505 inches maximum

• Terminal Location

  radially positioned over less than half the circumference

• Maximum Starting Torque

  0.50 inch-ounces

• Maximum Running Torque

  0.40 inch-ounces

• Electrical Resistance Per Section

  10.0 percent, rated amperes c and better flooring

• Mounting Lip Depth

  0.0570 nominal mils and 0.0670 nominal centimeters

• Function Conformity Tolerance Per Section

  -0.25/+0.25 single section

• Features Provided

  humidity proof

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  320.0 nominal

• Function Characteristic Per Section

  7 oclock all primaries

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Undercut Width

  0.0570 inches minimum

• Section Quantity

  1

• Shaft Runout

  0.002 inches

• ~1

  section and -5.0/+5.0 125 deg celsius single s

• Resistance Temp Characteristic Range Per Section In Percent

  -5.0/+5.0 105 deg celsius single section and -5.0/+5.0 75 deg celsius single section and -2.5/+2.5 50 deg celsius single section and -2.5/+2.5 0 deg celsius single section and -5.0/+5.0 -65 deg celsius single section and -4.0/+4.0 -15 deg celsius single

• Special Test Features

  resistors supplied are intended for use in flight hardware

• Fragility Factor

  moderately rugged

• Terminal Type And Quantity

  3 turret

• Shaft End Play

  0.005 inches

• Cubic Measure

  0.522 cubic inches

• Shaft Style

  round, slotted

• Function Conformity Per Section

  single section independent linearity

• Shaft Bearing Type

  sleeve

• Mechanical Backlash In Deg Angular Rotation

  0.1

• Body Diameter

  0.906 nominal centimeters

• Undercut Diameter

  0.781 inches maximum

• Shaft Length

  0.594 inches minimum and 0.656 inches maximum

• Mounting Method

  clamp

• Mounting Lip Diameter

  0.8650 inches minimum and 0.8800 inches maximum

• Pilot Diameter Runout

  0.001 inches

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• End Item Identification

  lantirnnavpod

• Departure From Cited Designator

  clamp rings are not acceptable

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Lateral Runout

  0.002 inches

• Shaft Diameter

  0.1245 inches minimum and 0.1255 inches maximum

• Body Length

  0.810 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Test Data Document

  04939-717801828 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary quality

• Actuator Travel Control Feature

  continuous motion