NSN: 5905-01-348-9960
Resistors
RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION
RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
~1
section
-
End Item Identification
5895-01-166-6949 display board,combat information central
-
Switch Current Type And Rating In Amps
1.000 ac
-
Actuator Travel Control Feature
stops
-
Fragility Factor
moderately rugged
-
Body Length
0.812 inches maximum
-
Terminal Location
rear-bottom
-
Effective Electrical Rotation In Deg Angular Rotation
292.0 minimum and 298.0 maximum
-
Shaft Diameter
0.124 inches minimum and 0.126 inches maximum
-
Body Style
cylindrical bushing mounted
-
Resistance Temp Characteristic Range Per Section In Percent
+0.0/+2.0 0 deg celsius single section and -3.0/+3.0 105 deg celsius single section and +0.0/+4.0 -40 deg celsius single section and -2.5/+2.5 85 deg celsius single section and +0.0/+5.0 -55 deg celsius single section and -4.0/+4.0 120 deg celsius single
-
Cubic Measure
0.159 cubic inches
-
Standard Taper Curve Per Section
a single section
-
Switch Contact Arrangement
single pole, single throw, normally open, both positions maintained
-
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section
-
Maximum Stop Torque
32.00 inch-ounces
-
Test Data Document
37695-228092 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
-
Rotary Actuator Travel In Angular Deg
255.0 minimum and 265.0 maximum
-
Screw Thread Diameter
0.250 inches nominal
-
Switch Voltage Rating In Volts
125.0
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 single section
-
Section Quantity
1
-
Nonturn Device Location
at 10'30 oclock
-
Screw Thread Quantity Per Inch
32.0
-
Shaft Style
round, slotted
-
Electrical Resistance Per Section
10.0 kilohms single section
-
Nonturn Device Radius
0.245 inches nominal
-
Switch Type
rotary
-
Power Dissipation Rating Per Section In Watts
0.5 free air single section
-
Special Features
terminal lugs exiting the side of the part body rather than the end
-
Shaft Bearing Type
sleeve
-
Maximum Running Torque
13.00 inch-ounces
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
120.0 single section
-
Maximum Starting Torque
13.00 inch-ounces
-
Body Diameter
0.500 inches nominal
-
Shaft Length
0.625 inches nominal
-
Terminal Type And Quantity
5 tab, solder lug
-
Features Provided
panel seal and switch
-
Actuator Type
single shaft
-
Reliability Indicator
not established
-
Screw Thread Series Designator
unef
-
Switch Operating Position
start of rotation
-
Mounting Bushing Length
0.250 inches nominal
-
Mounting Method
standard bushing