NSN: 5915-00-482-7151

Technical Characteristics

• Body Width

  2.251 inches minimum and 2.260 inches maximum

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

  1.437 inches nominal

• Output Terminal Manufacturer Code

  80045

• Inclosure Type

  encapsulated

• Input Terminal Manufacturer Code

  80045

• Functional Terminal Type And Quantity

  1 connector, receptacle output 2nd function

• Load Impedance Per Function

  50.0 ohms blank

• Input Impedance Per Function W/Load

  50.0 ohms blank

• Insertion Loss At Reference Frequency Per Function In Decibels

  6.0 blank

• Overall Length

  4.588 inches minimum and 4.597 inches maximum

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  4.176 inches nominal

• Input Terminal Identification

  2112-06-4

• Principal Circuitry Type Per Function

  inductance-capacitance blank

• Reference Frequency Per Function

  200.0 kilohertz blank

• Discrimination At Specified Frequencies Per Function In Decibels

  6.0 nominal blank and 60.0 nominal blank and 6.0 nominal blank and 60.0 nominal blank

• Functional Terminal Type And Quantity

  1 connector, receptacle input 1st function

• Output Impedance Per Function W/Source Across Input

  50.0 ohms blank

• Specified Frequencies Of Discrimination Per Function

  160.00 kilohertz blank and 179.00 kilohertz blank and 220.00 kilohertz blank and 260.00 kilohertz blank

• Style Designator

  rectangular terminal/terminals on opposite surfaces

• Output Terminal Identification

  2112-06-4

• Body Length

  4.000 inches nominal

• Source Impedance Rating Per Function

  50.0 ohms blank

• Frequency Band Width Per Function

  179.00 kilohertz blank and 220.00 kilohertz blank

• Overall Height

  0.874 inches minimum and 0.884 inches maximum

• Unthreaded Mounting Hole Diameter

  0.140 inches nominal

• Mounting Facility Type And Quantity

  4 unthreaded hole

• Test Data Document

  80045-es361834 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)