NSN: 5925-00-247-6979

Technical Characteristics

• Internal Trip Release Configuration

  relay trip fourth location

• Fragility Factor

  moderately rugged

• Switch Terminal Type

  tab, solder lug

• Circuit Protection Type

  overcurrent all locations

• Terminal Type And Quantity

  10 threaded stud

• Thread Series Designator

  unc

• Actuator Position Designation

  at each pole

• Reset Method

  manual

• Mounting Surface To Terminal End Distance

  2.461 inches minimum and 2.481 inches maximum

• Center To Center Distance Between Terminals Parallel To Length

  1.928 inches minimum and 1.948 inches maximum

• Storage Type

  general purpose warehouse

• Trip Delay Time In Seconds Per Rated Continuous Current

  8.000 minimum at 300 pct all locations and 25.000 maximum at 300 pct all locations

• Switch Location And Position Designation

  internal at pole one

• Auxiliary Switch Function And Quantity

  1 control

• Case Material

  plastic

• Pole Quantity

  4

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

  0.740 inches minimum and 0.760 inches maximum

• Operating Voltage Type And Rating Per Pole In Volts

  120.0 ac fourth location

• Maximum Continuous Load Current Rating Per Pole

  25.0 amperes ac all locations

• Body Width

  2.990 inches minimum and 3.010 inches maximum

• Frequency In Hertz

  400.0 all locations

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac first location

• Body Length

  2.490 inches minimum and 2.510 inches maximum

• Manual Actuator Type And Quantity

  4 toggle

• Boss Height

  0.130 inches minimum and 0.150 inches maximum

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  150.0 all locations

• Nominal Thread Size

  0.138 inches

• Center To Center Distance Between Terminals Parallel To Width

  0.740 inches minimum and 0.760 inches maximum

• Internal Trip Release Configuration

  series trip third location

• Main Contact Tripping Mechanism Type

  trip free

• Arc Quenching Method

  magnetic blowout

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  2.052 inches minimum and 2.072 inches maximum

• Trip Release Characteristic

  time delay all locations

• Actuator Function

  trip-reset

• Test Data Document

  18876-11152623 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac second location

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  1000.0 ac all locations

• Thread Quantity Per Inch

  32

• Mounting Facility Type And Quantity

  8 threaded hole

• Trip Release Method

  magnetic all locations

• Body Style

  multipole-multiple actuator type

• Internal Trip Release Configuration

  series trip first location

• External Actuator Linkage Arrangement

  one, two, three, and four linked

• Switch Contact Arrangement

  single pole, double throw

• Switch Current Rating And Type In Amps

  2.5 ac and 1.0 dc

• Inclosure Protection Type For Which Designed

  fungus resistant and moisture resistant

• Switch Voltage Rating And Type In Volts

  250.0 ac and 50.0 dc

• Unpackaged Unit Weight

  14.000 ounces

• Internal Trip Release Configuration

  series trip second location

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac third location