NSN: 5925-01-133-1594

Technical Characteristics

• Body Length

  5.768 inches minimum and 5.832 inches maximum

• End Item Identification

  item is used in an electrical power distribution panel on a 32 ft. coast guard vessel

• Boss Height

  0.209 inches minimum and 0.229 inches maximum

• Mounting Slot Width

  0.164 inches nominal

• Body Width

  2.038 inches minimum and 2.102 inches maximum

• Case Material

  plastic

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  2.718 inches minimum and 2.782 inches maximum

• Mounting Surface To Terminal End Distance

  3.172 inches minimum and 3.296 inches maximum

• Pole Quantity

  2

• Mounting Facility Type And Quantity

  4 threaded hole and 4 slot

• Storage Type

  general purpose warehouse

• Thread Quantity Per Inch

  32

• Circuit Protection Type

  overcurrent

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  125.0

• External Actuator Linkage Arrangement

  one,two,and three linked

• Internal Trip Release Configuration

  series trip

• Nominal Thread Size

  0.138 inches

• Trip Delay Time In Seconds Per Rated Continuous Current

  35.000 minimum at 200 pct and 100.000 maximum at 200 pct

• Frequency In Hertz

  60.0

• Terminal Type And Quantity

  4 threaded stud

• Thread Series Designator

  unc

• Inclosure Protection Type For Which Designed

  fungus resistant and moisture resistant

• Actuator Position Designation

  at each pole

• Actuator Function

  trip-reset

• Manual Actuator Type And Quantity

  2 toggle

• Main Contact Tripping Mechanism Type

  trip free

• Reset Method

  manual

• Trip Release Characteristic

  time delay

• Trip Release Method

  magnetic-hydraulic

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  5000.0 ac

• Operating Voltage Type And Rating Per Pole In Volts

  240.0 ac

• Maximum Continuous Load Current Rating Per Pole

  100.0 amperes ac

• Arc Quenching Method

  magnetic blowout

• Fragility Factor

  moderately rugged

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

  1.016 inches minimum and 1.036 inches maximum

• Center To Center Distance Between Terminals Parallel To Width

  1.016 inches minimum and 1.036 inches maximum

• Center To Center Distance Between Terminals Parallel To Length

  3.515 inches minimum and 3.579 inches maximum

• Body Height

  2.828 inches nominal

• Body Style

  multipole-multiple actuator type