NSN: 5925-01-173-1758

Technical Characteristics

• Reset Method

  manual

• Main Contact Tripping Mechanism Type

  trip free

• Actuator Function

  trip-reset

• Inclosure Protection Type For Which Designed

  general purpose

• Trip Release Ambient Temp Rating

  25.0 deg celsius nominal single location

• Frequency In Hertz

  400.0 single location

• Circuit Protection Type

  overcurrent single location

• Maximum Continuous Load Current Rating Per Pole

  10.0 amperes ac and 10.0 amperes dc single location

• Pole Quantity

  1

• Mounting Surface To Terminal End Distance

  1.312 inches nominal

• Body Length

  0.750 inches nominal

• Bushing Length

  0.040 inches minimum and 0.055 inches maximum

• Body Style

  1a single pole type

• Terminal Type And Quantity

  2 tab w/screw

• Thread Series Designator

  unc

• Special Features

  rotate ampere rating symbol located on pushbutton 180 degree

• Trip Delay Time In Seconds Per Rated Continuous Current

  5.000 minimum at 200 pct and 15.000 maximum at 200 pct single location

• Nominal Thread Size

  0.138 inches

• Internal Trip Release Configuration

  series trip single location

• Actuator Position Designation

  at pole one

• Manual Actuator Type And Quantity

  1 push-pull

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  138.0 single location

• Trip Release Characteristic

  time delay single location

• Trip Release Method

  thermal single location

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  2500.0 ac and 6000.0 dc single location

• Operating Voltage Type And Rating Per Pole In Volts

  120.0 ac and 30.0 dc single location

• Thread Quantity Per Inch

  32

• Iii Storage Type

  general purpose warehouse

• Mounting Facility Type And Quantity

  1 threaded bushing w/panel seal

• Iii Fragility Factor

  moderately rugged

• Center To Center Distance Between Terminals Parallel To Length

  0.704 inches nominal

• Case Material

  plastic

• Body Width

  0.562 inches nominal

• Thread Pitch Diameters

  0.444 to 0.447 inches