NSN: 5925-01-234-1214

Technical Characteristics

• Case Material

  plastic

• Thread Series Designator

  unc

• Trip Delay Time In Seconds Per Rated Continuous Current

  2.500 minimum at 200 pct and 25.000 maximum at 200 pct

• Nominal Thread Size

  0.138 inches

• External Actuator Linkage Arrangement

  one and two linked

• Actuator Position Designation

  at each pole

• Actuator Function

  trip-reset

• Manual Actuator Type And Quantity

  2 toggle

• Reset Method

  manual

• Trip Release Characteristic

  time delay

• Trip Release Method

  magnetic-hydraulic

• Circuit Protection Type

  overcurrent

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  1000.0 ac

• Operating Voltage Type And Rating Per Pole In Volts

  250.0 ac

• Maximum Continuous Load Current Rating Per Pole

  15.0 amperes ac

• Thread Quantity Per Inch

  32

• Storage Type

  general purpose warehouse

• Arc Quenching Method

  magnetic blowout

• Pole Quantity

  2

• Boss Height

  0.125 inches minimum and 0.135 inches maximum

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

  1.655 inches minimum and 1.665 inches maximum

• Center To Center Distance Between Terminals Parallel To Length

  1.555 inches minimum and 1.565 inches maximum

• Body Width

  1.468 inches minimum and 1.532 inches maximum

• Body Length

  1.985 inches minimum and 2.015 inches maximum

• Terminal Type And Quantity

  4 tab,solder lug

• Frequency In Hertz

  60.0

• Inclosure Protection Type For Which Designed

  dustproof

• Internal Trip Release Configuration

  series trip

• Main Contact Tripping Mechanism Type

  trip free

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  125.0

• Mounting Facility Type And Quantity

  4 threaded hole

• Mounting Surface To Terminal End Distance

  1.835 inches minimum and 1.845 inches maximum

• Fragility Factor

  moderately rugged

• Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

  0.745 inches minimum and 0.755 inches maximum

• Center To Center Distance Between Terminals Parallel To Width

  0.745 inches minimum and 0.755 inches maximum and 0.755 inches maximum