NSN: 5930-00-069-3866

Technical Characteristics

• Shaft Length

  0.860 inches minimum single actuator and 0.890 inches maximum single actuator

• Contact Load Current Rating

  1.0 amperes resistive load ac at sea level

• Nominal Thread Size

  0.375 inches single mounting facility

• Shaft Type

  round, flatted single actuator

• First Flat Length

  0.360 inches minimum single actuator and 0.390 inches maximum single actuator

• Mounting Method

  threaded bushing single mounting facility

• Overall Width

  0.922 inches minimum and 0.952 inches maximum

• Thread Class

  2a single mounting facility

• Terminal Type

  tab, solder lug

• Contact Voltage Rating In Volts

  110.0 ac at sea level

• Switch Contact Basic Design

  nonpile-up symmetrical

• Thread Series Designator

  unef single mounting facility

• Shaft Flat/Slot Angular Location

  210.0 degrees from nonturn device single actuator

• Nonturn Device Type

  tab at 9:00 o'clock

• Contact Voltage Rating In Volts

  28.0 dc at sea level

• Contact Load Current Rating

  2.0 amperes resistive load dc at sea level

• Switch Actuator Indexing Position Quantity

  5 single actuator

• Overall Height

  0.985 inches minimum and 1.015 inches maximum

• Throw Quantity

  5 each section rear

• Nonturn Device Radius

  0.365 inches minimum at 9:00 o'clock and 0.385 inches maximum at 9:00 o'clock

• Individual Section Quantity

  2

• Operating Temp Range

  -25.0/+85.0 deg celsius

• Switch Actuator Stop Device Type

  fixed stop single actuator

• Shaft Diameter

  0.247 inches minimum single actuator and 0.250 inches maximum single actuator

• Switch Actuator Positioning Increment

  60.0 degrees single actuator

• Overall Length

  2.460 inches minimum and 2.490 inches maximum

• Flat Height

  0.211 inches minimum single actuator and 0.221 inches maximum single actuator

• Style Designator

  circular wafer, bushing mount

• Pole Quantity

  1 each section rear

• Test Data Document

  49671-992416 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Contact Switching Action

  breaks before makes each section rear

• Err Default

  err default and err default