NSN: 5930-01-036-4241

Technical Characteristics

• Shaft Diameter

  0.248 inches minimum 1st actuator and 0.251 inches maximum 1st actuator

• Throw Quantity

  10 1st section rear

• Contact Load Current Rating

  100.0 milliamperes resistive load dc at sea level

• Contact Switching Action

  breaks before makes 1st section rear

• Switch Actuator Stop Device Type

  fixed stop 2nd actuator

• Throw Quantity

  10 2nd section rear

• Overall Length

  3.317 inches maximum

• Pole Quantity

  1 each section front

• Shaft Flat/Slot Angular Location

  216.0 degrees from nonturn device all actuators

• Contact Switching Action

  breaks before makes 2nd section rear

• First Flat Length

  0.417 inches minimum 2nd actuator and 0.457 inches maximum 2nd actuator

• Thread Class

  2a single mounting facility

• Nonturn Device Type

  tab at 3:00 o'clock

• Hazardous Locations/Environmental Protection

  moisture resistant

• Terminal Type

  tab, solder lug

• Switch Actuator Indexing Position Quantity

  10 1st actuator

• Switch Actuator Positioning Increment

  36.0 degrees all actuators

• Shaft Diameter

  0.123 inches minimum 2nd actuator and 0.126 inches maximum 2nd actuator

• Switch Contact Basic Design

  nonpile-up symmetrical

• Thread Series Designator

  unef single mounting facility

• Switch Actuator Indexing Position Quantity

  8 2nd actuator

• Throw Quantity

  8 3rd section rear

• Rotor Through Connection Quantity

  1 each section

• Contact Voltage Rating In Volts

  28.0 dc at sea level

• Nonturn Device Radius

  0.360 inches minimum at 3:00 o'clock and 0.390 inches maximum at 3:00 o'clock

• Flat Height

  0.088 inches minimum 2nd actuator and 0.096 inches maximum 2nd actuator

• Individual Section Quantity

  3

• Shaft Length

  0.605 inches minimum 1st actuator and 0.645 inches maximum 1st actuator

• Overall Diameter

  1.154 inches maximum

• Contact Switching Action

  makes before breaks 3rd section rear

• Err Default

  err default and err default

• Shaft Type

  round, flatted 2nd actuator

• Criticality Code Justification

  feat

• Style Designator

  tap, circular, bushing mount

• Shaft Type

  round, hollowed, flatted 1st actuator

• Nominal Thread Size

  0.375 inches single mounting facility

• First Flat Length

  0.417 inches minimum 1st actuator and 0.457 inches maximum 1st actuator

• Special Features

  weapon system essential

• End Item Identification

  c-135 stratolifter, c-141 starlifter, c-5 galaxy aircraft.

• Operating Temp Range

  -18.0/+85.0 deg celsius

• Flat Height

  0.215 inches minimum 1st actuator and 0.223 inches maximum 1st actuator

• Mounting Method

  threaded bushing single mounting facility

• Shaft Length

  0.542 inches minimum 2nd actuator and 0.582 inches maximum 2nd actuator