NSN: 5930-01-142-7843

Technical Characteristics

• Contact Load Current Rating

  100.0 milliamperes resistive load dc at sea level

• Contact Switching Action

  breaks before makes 1st section rear

• Switch Actuator Indexing Position Quantity

  8 all actuators

• Overall Diameter

  1.000 inches minimum and 1.200 inches maximum

• Overall Length

  3.687 inches maximum

• Switch Actuator Stop Device Type

  fixed stop all actuators

• Pole Quantity

  1 each section front

• Shaft Flat/Slot Angular Location

  216.0 degrees from nonturn device all actuators

• Contact Switching Action

  breaks before makes 2nd section rear

• Detent Rotational Torque Range

  +8.000/+20.000 inch-ounces 2nd actuator

• Detent Rotational Torque Range

  +15.000/+32.000 inch-ounces 1st actuator

• Flat Height

  0.088 inches minimum 2nd actuator and 0.096 inches maximum 2nd actuator

• Individual Section Quantity

  3

• Shaft Length

  0.605 inches minimum 1st actuator and 0.645 inches maximum 1st actuator

• Contact Switching Action

  makes before breaks 3rd section rear

• Err Default

  err default and err default

• Shaft Type

  round, flatted 2nd actuator

• Style Designator

  tap, circular, bushing mount

• Shaft Type

  round, hollowed, flatted 1st actuator

• Nominal Thread Size

  0.375 inches single mounting facility

• First Flat Length

  0.417 inches minimum 1st actuator and 0.457 inches maximum 1st actuator

• First Flat Length

  0.230 inches minimum 2nd actuator and 0.270 inches maximum 2nd actuator

• Shaft Diameter

  0.248 inches minimum 1st actuator and 0.251 inches maximum 1st actuator

• Nonturn Device Radius

  0.360 inches minimum at 3:00 o'clock and 0.390 inches maximum at 3:00 o'clock

• Contact Voltage Rating In Volts

  28.0 dc at sea level

• Rotor Through Connection Quantity

  1 each section

• Thread Series Designator

  unef single mounting facility

• Switch Contact Basic Design

  nonpile-up symmetrical

• Shaft Diameter

  0.123 inches minimum 2nd actuator and 0.126 inches maximum 2nd actuator

• Switch Actuator Positioning Increment

  36.0 degrees all actuators

• End Item Identification

  e3a an/asn118

• Terminal Type

  tab, solder lug

• Hazardous Locations/Environmental Protection

  moisture resistant

• Nonturn Device Type

  tab at 3:00 o'clock

• Thread Class

  2a single mounting facility

• Mounting Method

  threaded bushing single mounting facility

• Shaft Length

  1.147 inches minimum 2nd actuator and 1.227 inches maximum 2nd actuator

• Flat Height

  0.215 inches minimum 1st actuator and 0.223 inches maximum 1st actuator

• Throw Quantity

  8 each section rear